Best drilling chemicals
Since 1976
All products
The P24 polymer is a partially hydrolyzed acrylamide copolymer (PHPA) with a high molecular weight and anionic charge. In the technology of drilling muds, the P24 polymer is used as a flocculant and as a means of reducing the hydration of clay rocks. At low concentrations of 10-100 g/m3, the product causes flocculation of drill cuttings and prevents the dispersion of the solid phase in the mud. At concentrations of 0.5-2.0 kg/m3, the polymer forms encapsulating shells and reduces hydration and swelling of drilled clay rocks. The addition of P24 to the mud simultaneously increases viscosity, lowers the coefficient of friction and improves coring performance. The product should be added slowly through a hydraulic mixer and continue mixing for about 15 minutes, i.e. until the polymer is completely dissolved in the mud. The measurement of the P24 polymer content in the drilling fluid follows the standard P24 determination procedure. e.g. Poly-Plus dry.
Tests of the polymer-potassium mud with the content of 0.1% P24 polymer were carried out in the Oil and Gas Institute’s Laboratory in Krakow. They were aimed at determining the effect of the polymer on active clay rocks and changing the permeability of reservoir rocks. As a result of the tests, it was found that the tested mud fully meets the requirements for muds for drilling clay rocks a at the same time, it only slightly reduces the primary permeability of reservoir rocks.
P24 polymer is packed in 25 kg multilayer paper bags. There are 40 bags of the product (1000 kg) on one pallet.
Modithin 500
BDC PAC LV
Swellgel PF Bentonite
SWDC Bentonite (Attapulgite)
We offer a wide range of services, including mud service, selection of a drilling fluid to meet specific requirements, laboratory testing of drilling fluids and recycling of drilling fluids.
By taking care of managing the waste produced during drilling, you can significantly reduce the consumption of consumables.