Best drilling chemicals
Since 1976
All products
P-24 is high molecular weight anionic polymer. It is acting as flocculant, shale inhibitor agent and viscosifer. The effect of the product depends mainly on the exchange of electric charges between those on the reactive groups of the polymer chain and electrically charged centers on the surface charges of the suspended solid particles. The surfaces of the particles are destabilized and flocculation takes place.
An addition of the P-24 to the water based drilling mud is resulting in :
Generally, P-24 is used in highly diluted aqueous solutions. It is possible to first prepare a stock solution (0.3 – 0.5 wt. %) and to dilute this before use, or to prepare a feed solution (< 0.05 wt. %). To achieve full effectivity 60 minutes gentle stirring (at a temperature of approx. 20°C) is necessary.
In water base drilling fluid:
10-100 g/m³ flocculation of cuttings
0,5-2,0 kg/m³ inhibition of clays and loams
P24 is sensitive to moisture, such as condensation, water droplets and humidity. Contact with water (droplets) can lead to local formation of knots and lumps. The product should therefore be stored in dry, closed containers and protected against moisture. The containers should be resealed after removing the material. The storage temperature should not exceed 40oC for long periods.
25 kg bags or 650 kg big bags
Swellgel Plus Bentonite
Modithin 500
BDC PAC LV
Swellgel Bentonite
We offer a wide range of services, including mud service, selection of a drilling fluid to meet specific requirements, laboratory testing of drilling fluids and recycling of drilling fluids.
By taking care of managing the waste produced during drilling, you can significantly reduce the consumption of consumables.